CLEANING & CARE
We have created some informative and important videos to help you keep your Cinderella Incineration Toilet in top shape! We highly recommend giving them a watch even if you know what to do as there are some useful tips & tricks in them. See below for a quick 'How to Use' Guide.
Regular Clean
Empty & Clean the ash Container
Weekly
Select your Toilet
Deep Clean
After 500 uses or 1 box of liners
Clean the internal components, exhaust system and vent pipe
Select Your Toilet
We recommend a regular clean every week or when emptying your ash container. This will help keep your product within its 3-year warranty.
We recommend a full clean after every 500 liners, as shown in our Maintenance video, to support your 3-year warranty and keep your toilet in top condition.
Please note: under NZ gas regulations, only an authorised person can install, connect, or disconnect the Freedom toilet.
USING THE CINDERELLA TOILET
Lift the toilet lid and seat. A red light starts flashing. The ventilation fan starts
Place a Bowl Liner in the Bowl. Use a new Bowl liner for every visit.
Lower the seat. The toilet is ready to use.
Use the toilet as usual. If little waste id produced, it may be helpful to pour some water into the bowl to ass weight.
Close the toilet Lid
Push the "Start" button to drop the bowl liner and its contents into the incineration chamber. Incineration begins as soon as the hatch is closed. The toilet is now ready for the next user
Check that the green light on the control panel is lit, indicating the unit is powered and ready to use.
Empty the contents of the ash tray into the household waste.
Fill the ash tray with boiling water.
Leave to soak for 15-30 minutes. Add some dishwash liquid and cover to keep the heat in.
HOW TO CLEAN YOUR TOILET
Dispose of contents
Rinse with hot water. Repeat steps 2-5 if residue still remaining.
Metal objects should NOT be used to remove residues in the ash tray.
Residues of salt and lime will normally dissolve. Use a scrub brush to wash away any remaining residue.
Insert the ash tray in the ash container.
9
Pour approximately 1 L of clean water into the toilet insert.
10
Use a damp cloth to wipe the inside compartment and burner tube to remove any white residue.
11
Insert the ash container carefully without spilling any water and attach the front cover.
Press "Start" to begin an incineration cycle. This system cleaning will normally take 60-80 minutes.
12
13
Once finished you are all ready to use as normal. Continue below for a Deep Clean.
Note: View or Download toilet specific cleaning instructions above.
NOTE: The flue pipe and ashpan locking mechanism has changed in later model toilets but the basic procedures are the same.