The Cinderella Tiny Home toilet is suitable for single level tiny homes or spaces where the roof height is no higher than 3 metres.
This toilet is easy to maintain without needing to take it out of the room for cleaning.
Cinderella’s incineration toilets incinerate urine and excrement at a high temperature, leaving only a small amount of ash. This toilet is perfect for 1 - 2 people. Using the toilet for a week will only produce about one teacup of ash. Cinderella is a total waste solution, in that it gets rid of all toilet waste.
This toilet was launched on the market in 2013 and is a further development of the popular Cinderella Eco Group incineration toilets that have been available since 1999. It is environmentally friendly and does not require a connection to the power grid.
Easy to use
Cinderella incineration toilets are easy to use, and Cinderella toilet bags safely transport the waste to the combustion chamber. This makes the toilet very hygienic and clean, compared to other options. Lift up the lid and seat. Place an original Cinderella toilet bag in the bowl and put the seat back down. Use the toilet as normal and put the lid down when you are done. Press the “flush button” and the bag is released into the combustion chamber. The toilet is now ready for use again.
This toilet can either be retrofitted against an existing wall or built into the cavity of a wall. Whichever you choose, we recommend you have the installation performed by expert professionals to ensure maximum performance.
The installation kit supplied includes the following
Product manuals
100 pcs original bowl liners
Roof feedthrough flange
Docking frame
Flue terminal cap
Winter extension
Control panel
Mounting screws
Air inlet cassette
Cinderella Tiny Home Toilet
Make it a Set - Buy a Toilet, Get 50% Off a Urinal
Technical Specifications
DIMENSIONS OF THE TOILET
Weight 20 kg
Height 540 mm
Seat height 490 mm
Width 390 mm
Depth 590 mm
Capacity 3-4 visits per hour
Max. depth operating shell elevator 613 mm + 100 mm Build-in Module
Max. height operating shell elevator 845 mm
TECHNICAL SPECIFICATIONS, ELECTRIC
Supply voltage 11-14.5 VDC
Red cable Positive
Supply fuse 10A
Peak load 4 A
Power consumption (incineration) 1.3 A
Dimensional supply under 10 m 1.5 mm²
Dimensional supply 10 - 17 m 2.5 mm²
TECHNICAL SPECIFICATIONS
Inner diameter exhaust hose 60 mm
Insulation thickness 13 mm, approx. 102 mm diameter
Max temperature exhaust gases 118 ° C
Max temperature insulation exterior 55 ° C
Hole saw diameter for Roof feed-through flange 83 mm
Maximum length of exhaust hose 250 cm
Max temperature Build-in module 74 °C at 45 °C inlet temperature
TECHNICAL SPECIFICATIONS, GAS SUPPLY
Gas supply Ø 8 mm compression coupling
Gas supply connector material Brass
Gas type Propane or LPG
Gas pressure 30 mBar
TECHNICAL SPECIFICATIONS, AIR INLET
Diameter inlet air hose 75 mm
Maximum length inlet air hose 120 cm
Minimum air grating size 50 cm² light opening
Air consumption during incineration 52 m3/h
